Skip to main content
<--

Flexible Racks

Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive of up to approx 270 degrees for example on camera focus rings. They also provide an economical solution where a large gear is required or a longer stretch (up to 2 metres) of linear motion is desired. These racks are compatible with our 0.8 Mod pitch Spur Gears.

Flexible Plastic Gear Rack

Specification

Material: Duracon(M25-44) Tooth form: 0.8 Metric Module (32DP equivalent) profile with 20° pressure angle
compatible with our 0.8 Mod Gears
Length: 250mm to 2000mm

 
RKF08M0250 0.8 250
RKF08M0500 0.8 500
RKF08M1000 0.8 1000
RKF08M2000 0.8 2000

0.8 Mod (32DP) Flexible Rack Dimensions

Flexible Gear Rack Drawing
 

0.8 Mod Flexible Rack Clamp

Flexible Rack Clamp
Flexible Gear Rack on Camera Lens
 

Our 0.8 Mod Flexible Rack Clamp enables the flexible rack to be used as a gear ring, by clamping it onto a cylinder or barrel, which can then be rotated using a mating 0.8 Mod pinion drive gear . The maximum angular rotation of the cylinder will depend on the diameters of the cylinder and the matching pinion drive gear, but will generally be in the range of 270 to 330 degrees.

Unique motionco design allows easy assembly and fitting, with facility to release, re-position, and re-tighten as required.

There is no metal-to-metal contact with the cylinder or barrel onto which it is clamped


Select from our range of flexible gear racks below.

!