Skip to main content
<--

Micro Spur Gearmotor

Micro Gear Motors. Permanent Magnet DC motors with Steel Spur Gearboxes in a very small 12mm form factor. These motors are suitable for a variety of uses from model making and robotics to automation and small scale industrial applications.

Micro Gear Motor 12
Micro Gear Motor 12 dimensions front
 
Part No. Ratio   Output Speed          
GMS12D0030  30:1  12V  1000 rpm  0.06  0.11   0.4   0.75   10g 
GMS12D0050  50:1   500 rpm   0.15   0.65   10g 
GMS12D0100  100:1   300 rpm   0.3   1.2   10g 
GMS12D0298  298:1   100 rpm   0.73   3.3   10g 
GMS12D1000  1000:1   30 rpm   2.1   10.0   10g 
 

MICRO MOTOR MOUNTING OPTIONS.


1.The motor can be mounted directly onto a device, using the two threaded M1.6 holes in the gearbox end plate This will require the device to have two holes of 1.6mm diameter at 9mm centres either side of the motor shaft position, with a 4mm diameter hole centrally between to accommodate the bezel surrounding the shaft. See diagram below.

Micro Gear Motor 12
 

2. The motor can simply be secured onto a motionco Mounting Bracket with two M1.6 screws (provided). The bracket has two 5mm fixing holes in the base, at centres of 20mm, and is of sturdy stainless steel construction. It is fully compatible with the Meckit Construction System, enabling the motor to be robustly mounted directly onto Meckit channels, plates and bases without any machining operations.

Micro Gear Motor 12 and bracket

3. The motionco Mounting Plate is an alternative format of the above bracket, allowing different mounting configurations.

Micro Gear Motor 12 and plate
 

Select from our range of Micro Spur Gear Gearmotors below.

!